Spool welding robot SWR | ABICOR BINZEL (2024)

If you are looking for a way to organise your pipe processing more economically, we have the solution for you: the Spool Welding Robot, SWR. Depending on the welding job, you can use this collaborative robot to weld steel pipes with a wall thickness of up to 50 mm just as well and precisely as stainless steel pipes with a wall thickness of 2.5 mm or more – and you can weld non-stop from the root to the cap layer.

Thanks to the intuitive operation and the inclusion of up to 60 pre-programmed weld recipes, it is very easy for you to adapt the spool welding robot into your workshop.With the use of Novarc’s NovEye™ visual camera system you can easily reduce your reliance on highly skilled welders while significantly increasing your productivity in pipe welding and reducing your repair rates with x-ray quality welds.

Welding black steel, low-alloy steels, stainless steel or nickel alloys faster in pipe processing and reducing costs at the same time has never been so easy. Take advantage of the great potential for maximising your profits in pipe welding offered by the SWR spool welding robot. This turnkey system solution is made possible by the international co-operation between Novarc Technologies and ABICOR BINZEL.

• Equipment of the SWR
• Proven MAG technology for pipe processing
• Advantages of the SWR spool welding robot
• The challenges of pipe welding
• Technical data
• Video
• FAQs
• Documentation

The SWR can be integrated with up to five welding positioners with one SWR spool welding robot. This allows you to maximise the arc-on time while minimising the arc-off time. With this advantage you can weld on one pipe, as the other positioners are being prepared with the next pipe spool that is ready for welding.

In conjunction with the integrated laser system, the Novarc Weld Vision System can measure tolerances from the root gap and define special offset deviations. This system therefore runs continuously during the welding process. If you want to retrace the parameters and arc progression of the weld seams at a later date, you can call up the data retrospectively: on the one hand in the form of a Windows-based database table, and on the other in the form of a video that records the welding process for each weld.

Its flexible technology is able to weld a large number of pipe connections with comparatively little space requirement. You can position the SWR on a wall, in a corner or in the centre of your production area to achieve maximum efficiency - whatever your space situation allows.

With this cobot for pipe welding, you are highly flexible and can even weld different geometries and fittings, such as:

• Pipe-pipe connections
• Pipe-flange
• Pipe bends/elbows
• Cones or truncated cones
• T-pieces
• Fittings with flange

The SWR welds three to five times faster on carbon steel, and up to 12 times faster on stainless steel when compared to manual welding whilst delivering consistent x-ray quality welds. If you use several positioners, you can even work in parallel and, for example, remove components or reload a positioner while the SWR is welding. Changing stations or positions between positioners and components can be carried out within 3 minutes using pre-programmed welding recipes. This allows you to stop welding on one component and move to the next component when approaching interpass temperatures maximising arc on time.

This results in an almost 100 percent arc-on time per shift. Ancillary costs are therefore reduced while allowing you to increase your productivity.

With the SWR you get an excellent combination of a cobot for pipe welding and ABICOR BINZEL welding technology products. This provides you with the best basis for consistent quality and good results when welding pipes. The ABICOR BINZEL products are as below:

• ABIROB® W robot welding torch
• MasterLiner wire feeding system
• EWR 2 Net gas management system (optional)
• xFUME® fume extraction systems (optional)

• Welds pipes from root cap without interruption
• Reduces the workload of manual welders
• Reduces dependence on highly skilled welders, whose availability on the labour market has been in sharp decline for years
• Increases productivity by a factor of 12 for stainless steel pipe welding and by a factor of 3-5 for carbon steel pipe welding
• Reduced repair rate to <1 %
• Small footprint of 1.2 m x 1.2 m
• Up to 5 welding positioners of various turning capacities can be connected in the work area
• Flexible equipment options offer solutions for any application, no matter how challenging
• Optional second weld head for high deposition welding utilising twin-wire welding technology

As in any manufacturing company, the motto "time is money" also applies to pipe welding. The smarter you automate, the more economically you can produce.

You are probably familiar with the following or similar situations:

• You have to reject large projects because you don't have the capacity for additional quantities
• The setup for a welding job takes a lot of time
• Conventional 6-axis robots are not suitable for pipe welding because they are too complex to programme or block your workspace due to the necessary housing
• Fixed welding robots on rails severely restrict production and are too expensive
• If many joints have to be welded, the space required is very large

The spool welding robot SWR solves all these challenges at once. The best thing is that, depending on the frequency of use, the investment in a spool welding robot SWR pays for itself within an average of 6-18 months.

Please feel free to contact us for more information and pricing.

We also have financing options available!